100G QSFP28 SR4 850nm 100m Optical Transceiver Module

Description of 100G QSFP28 SR4 Optical Transceiver

This product is a parallel 100Gb/s Quad Small Form-factor Pluggable (QSFP28) optical module, which provides increased port density and total system cost savings and high performance for future data center and networking use. This 100G QSFP28 SR4 full-duplex optical module offers 4 independent transmit and receive channels, while each capable offers 25Gb/s operation for an aggregate data rate of 100Gb/s on 100 meters of OM4 multi-mode fiber. The 100G QSFP28 SR4 optical transceiver module works following this process: an optical fiber ribbon cable with an MTP/MPO connector can be plugged into the QSFP28 module receptacle, and proper alignment is ensured by the guide pins inside the receptacle. Please be noted that the cable usually cannot be twisted for proper channel to channel alignment. Electrical connection is achieved through an MSA-compliant 38-pin edge type connector. The 100G QSFP28 SR4 optical module operates by a single +3.3V power supply. LVCMOS/LVTTL global control signals, such as Module Present, Reset, Interrupt and Low Power Mode, are available with this 100G QSFP28 SR4 modules. A 2-wire serial interface is available to send and receive more complex control signals, and to receive digital diagnostic information. Individual channels can be addressed and unused channels can be shut down for maximum design flexibility.

Features of 100G QSFP28 SR4 Optical Transceiver      

4 independent full-duplex channels

Up to 25Gb/s data rate per channel

QSFP28 MSA compliant

Compliant to IEEE 802.3bm 100GBASE-SR4

Up to 100m OM4 MMF transmission

Operating case temperature: 0 to 70oC

Single 3.3V power supply

Maximum power consumption 2.5W

MTP/MPO optical connector

RoHS-6 compliant

Applications of 100G QSFP28 SR4 Optical Transceiver

Rack to Rack

Data Center

Infiniband QDR, DDR and SDR

100G Ethernet

Parameter of 100G QSFP28 SR4 Optical Transceiver

Dimensions of 100G QSFP28 SR4 850nm 100m Optical Transceiver

Every transceiver module is individually tested on full range of DataComm equipments, walks through the testing challenges and 100% compatibility.

5/25/2016 5:06:51 AM

Contact us

As a leading optical transceiver module provider, DataComm offers both excellent high-quality products and servies to global customers over the world. And you can contact us for inquiry and quote as below ways.
8A,Haiyuege ,Huijing Haoyuan,NO.10 Kexing Road, Science Park,Nanshan District,Shenzhen,Guangdong,China. 518057
Telephone number: